LockState LS-35EPL Instruction Manual download pdf

LS-LC-35D FIRE SAFE USER MANUAL

STEP 1 – OPENING THE SAFE:

1. PRESS THE START KEY. THE LCD DISPLAY WILL SHOW “--------“.

2. ENTER THE ACCESS CODE. (Default code is: “0-0-0-0”)

3. PRESS THE START KEY, AND THE LCD DISPLAY WILL SHOW

“OPEN”.

4. TURN THE KNOB TO OPEN THE DOOR.

STEP 2 – CHANGING THE USER CODE

1. OPEN THE SAFE DOOR (see STEP 1 above)

2. PRESS THE RED RESET BUTTON (located in the center of the door on the

back side), THE LCD DISPLAY WILL SHOW “SET-CODE”.

3. WHILE THE LCD IS ALLUMINATED, ENTER YOUR NEW CODE (3-8

DIGITS) AND PRESS THE START KEY.

• THE LCD WILL SHOW “IN”.

• YOUR NEW CODE WILL BRIEFLY FLASH ON THE LCD

4. YOUR CODE IS NOW SET.

STEP 3 – CHANGING MASTER CODE

1. OPEN THE SAFE DOOR (see STEP 1 above)

2. PRESS THE SETUP BUTTON (LOCATED IN BACK OF DOOR), THE LCD

DISPLAY WILL SHOW “SET-CODE”.

3. PRESS THE START KEY, THE LCD DISPLAY WILL SHOW OLD-CODE.

4. WHILE THE LCD IS ALLUMINATED, ENTER THE CURRENT MASTER

CODE (the default is : “8-8-8-8”) AND PRESS THE START KEY (the LCD will

display “SET”.

• ENTER YOUR NEW MASTER CODE (3-8 DIGITS) - the LCD

DISPLAY will show “RE-INPUT”.

• ENTER YOUR NEW MASTER CODE AGAIN - the LCD

DISPLAY will show “IN” AND WILL BRIEFLY SHOW YOUR NEW

MASTER CODE.

YOUR MASTER CODE IS NOW SET

SAFE FEATURES:

1 2

Page 1

LS-LC-35D FIRE SAFE USER MANUAL STEP 1 – OPENING THE SAFE: 1. PRESS THE START KEY. THE LCD DISPLAY WILL SHOW “--------“. 2. ENTER THE ACCESS CODE

Page 2

• CHANGE THE BATTERIES WHEN THE LCD DISPLAY SHOWS “LO-BAT” • THE LCD DISPLAY SHOWS ERROR IF YOU ENTER AN INCORRECT CODE. • IF YOU ENTER AN INCORRECT

No comments

LockState LS-35EPL Instruction Manual